Einführung
This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your KERDOM Foldable Electric Wheelchair, Model KD-B02. Please read this manual thoroughly before using the wheelchair to ensure proper understanding and to prevent injury or damage.
Sicherheitshinweise
Ihre Sicherheit hat oberste Priorität. Halten Sie sich stets an die folgenden Sicherheitsrichtlinien:
- Always ensure the wheelchair is fully unfolded and locked before use.
- Engage the EABS parking system when stationary.
- Die maximale Gewichtskapazität von 330 lbs darf nicht überschritten werden.
- Avoid operating the wheelchair on slopes exceeding 12 degrees.
- Regularly inspect tires, brakes, and electrical connections.
- Halten Sie Hände und Kleidung von beweglichen Teilen fern.
- Use the seat belt at all times.
- Consult a healthcare professional for guidance on safe operation if you have any medical conditions.
Aufstellen
Aufklappen des Rollstuhls
The KERDOM electric wheelchair features a 3-second folding design for portability. To unfold:
- Stellen Sie den zusammengeklappten Rollstuhl auf eine ebene, stabile Fläche.
- Ziehen Sie die Rückenlehne vorsichtig nach oben, bis der Rahmen einrastet.
- Press down on the seat cushion until it is flat and secure.
- Stellen Sie vor der Verwendung sicher, dass alle Verriegelungsmechanismen eingerastet sind.
Figure 1: The KERDOM Foldable Electric Wheelchair in its unfolded state, ready for use.
Attaching the Joystick Controller
The 360° joystick controller can be attached to either the left or right armrest for user convenience.
- Locate the mounting bracket on the desired armrest.
- Slide the joystick controller onto the bracket until it clicks into place.
- Secure the controller using the provided screw or locking mechanism.
- Connect the controller cable to the corresponding port on the wheelchair frame.
Abbildung 2: Ausführlich view of attaching the joystick controller to the armrest.
Netzkabel anschließen
Ensure all power cables are securely connected before operating the wheelchair. Incorrect connections can lead to improper function or charging issues.
- Locate the main power cable connectors near the battery compartment.
- Connect the red power cord securely. Failure to do so may result in the charging indicator lighting up while charging, but not actually charging.
- Verify that all motor cables are correctly plugged in. If the wheelchair operates in the opposite direction, check and correct the left and right motor wire connections.
Video 1: Installation and use of electric wheelchairs and the solution of problems in use. This video demonstrates the setup process, including connecting the joystick and power cables, and addresses common issues like incorrect motor direction.
Bedienungsanleitung
Ein- und Ausschalten
- To power on: Press and hold the power button on the joystick controller until the indicator lights illuminate.
- Zum Ausschalten: Halten Sie den Netzschalter erneut gedrückt, bis die Kontrollleuchten erlöschen.
Fahren mit dem Rollstuhl
The 360° flexible joystick provides precise control over movement.
- Vorwärts rückwärts: Gently push the joystick forward or pull it backward.
- Drehen: Push the joystick left or right to steer.
- Anhalten: Release the joystick to its neutral position. The EABS parking system will automatically engage, stopping the wheelchair safely.
Figure 3: The intelligent 360° flexible joystick for precise maneuverability, showing controls for balance, steering sensitivity, and safe stopping on inclines.
Speed Adjustment and Horn
- Geschwindigkeitsanpassung: Use the '+' and '-' buttons on the joystick controller to increase or decrease the speed. The LED display will show the current speed setting.
- Horn: Press the horn button on the joystick controller to activate the horn for safety.
Betrieb im manuellen Modus
To push the wheelchair manually without power, you need to disengage the motors.
- Ensure the handbrake is in the down position.
- Pull out the clutches on both sides of the wheelchair (located near the rear wheels). This disengages the motors, allowing the wheels to move freely.
- To re-engage electric power, push the clutches back in.
Figure 4: Location of the manual brake and clutches for switching between electric and manual modes.
Wartung
Akkupflege und Aufladen
- Laden Sie den Akku vor dem ersten Gebrauch vollständig auf.
- Verwenden Sie nur das mitgelieferte Ladegerät.
- Laden Sie den Akku nicht über. Trennen Sie das Ladegerät, sobald der Akku vollständig geladen ist.
- Store the wheelchair and battery in a cool, dry place.
- If storing for extended periods, charge the battery every 1-2 months to maintain its lifespan.
Figure 5: The LED display on the joystick shows battery life and speed clearly, aiding in timely charging.
Reinigung und Lagerung
- Den Rahmen mit einem Tuch abwischenamp Tuch. Vermeiden Sie die Verwendung von Scheuermitteln.
- The breathable seat cushion can be removed for cleaning.
- For storage, fold the wheelchair as demonstrated in the setup section.
- An einem trockenen, geschützten Ort lagern. Vor direkter Sonneneinstrahlung und extremen Temperaturen schützen.
Figure 6: The compact, folded electric wheelchair fits easily into a car trunk for convenient transport and storage.
Reifenpflege
The wheelchair is equipped with solid, puncture-resistant tires, eliminating the need for inflation. Periodically check for debris embedded in the treads and remove them to maintain traction.
Fehlerbehebung
Sollten Sie auf Probleme stoßen, konsultieren Sie bitte die folgenden häufigen Probleme und Lösungen:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Der Rollstuhl lässt sich nicht einschalten. | Battery not charged or power cables disconnected. | Ensure battery is charged and all power cables are securely connected. |
| Wheelchair moves in the wrong direction. | Motor wires are plugged in backwards. | Check and correct the left and right motor wire connections. Refer to the setup video. |
| Der Rollstuhl bewegt sich nicht, wenn der Joystick gedrückt wird. | Clutches are disengaged (manual mode). | Push the clutches on both sides of the wheelchair back in to engage electric mode. |
| Charging indicator lights up but battery doesn't charge. | Red power cord is not securely connected. | Ensure the red power cord is firmly connected. |
Technische Daten
- Modell: KD-B02
- Gewichtskapazität: 330 Pfund
- Produktabmessungen: 36.19"T x 24.8"B x 33.4"H
- Gewicht (ohne Batterie): Ungefähr 57 Pfund
- Motor: Zwei 250-W-Motoren (insgesamt 500 W)
- Batterie: 24 V 12 Ah Lithium-Ionen
- Rahmenmaterial: Eisen, Kunststoff
- Kontrolle: 360° Joystick
- Bremssystem: EABS Parking System
- Kippsichere Räder: Inklusive
- Hangtauglichkeit: ≤12°
- Reifen: Puncture-resistant solid tires
Garantie und Support
KERDOM provides a 12-month warranty for this electric wheelchair. For any queries, technical assistance, or warranty claims, please contact KERDOM's 24/7 US-based customer support. Our quick-response team aims to resolve issues within 24 hours.
Weitere Informationen finden Sie im KERDOM Store.
