Einführung
This manual provides essential instructions for the safe and effective use, setup, operation, and maintenance of your TOOLCY Super Flexible Pressure Washer Hose and 5000 PSI Pressure Washer Gun. Please read this manual thoroughly before operating the product and retain it for future reference.
Sicherheitshinweise
WARNING: Pressure washers can cause serious injury if not used correctly. Always follow these safety guidelines:
- Always wear appropriate personal protective equipment, including eye protection, gloves, and hearing protection.
- Richten Sie die Spritzpistole niemals auf Menschen, Haustiere oder elektrische Geräte.
- Stellen Sie vor dem Betrieb sicher, dass alle Verbindungen sicher sind.
- Do not operate if any part of the equipment is damaged.
- Halten Sie Kinder und Unbeteiligte vom Arbeitsbereich fern.
- Always relieve pressure before disconnecting the hose or gun.
- Use only with compatible pressure washer units within the specified PSI limits.
Packungsinhalt
Prüfen Sie beim Auspacken, ob alle Artikel vorhanden und unbeschädigt sind:
- 1x TOOLCY Super Flexible Pressure Washer Hose (30ft, 3400 PSI)
- 1x TOOLCY Pressure Washer Gun (5000 PSI / 10.5 GPM)
- M22 and 3/8" Quick Connection Kit (various adapters)
Aufstellen
- Connect the Hose to the Pressure Washer:
Attach one end of the TOOLCY pressure washer hose to the high-pressure outlet of your pressure washer unit. Ensure a secure, leak-free connection. Use the appropriate M22 or 3/8" quick connector as needed for your specific pressure washer model.
- Connect the Gun to the Hose:
Attach the other end of the TOOLCY pressure washer hose to the inlet of the TOOLCY pressure washer gun. The gun features a 360° swivel inlet for flexible operation, allowing for easier maneuvering and reducing hose tangles. Ensure this connection is also secure.
Bild 2: Nahaufnahme view of the TOOLCY pressure washer gun's 360-degree swivel inlet, showing how the hose connects to allow for flexible rotation during use, preventing tangles. - Wasserversorgung anschließen:
Connect your pressure washer unit to a suitable water supply according to its manufacturer's instructions.
- Attach Nozzle (Not Included):
Attach your desired spray nozzle (not included with this kit) to the quick-connect fitting at the end of the pressure washer gun.
Bedienungsanleitung
- Wasserdurchfluss starten:
Turn on the water supply to the pressure washer unit. Squeeze the trigger on the pressure washer gun to purge air from the system until a steady stream of water emerges.
- Hochdruckreiniger starten:
Start your pressure washer unit according to its manufacturer's instructions.
- Reinigung beginnen:
Hold the pressure washer gun firmly with both hands. Maintain a safe distance from the surface being cleaned. Squeeze the trigger to begin spraying. The ergonomic design and lightweight trigger of the TOOLCY gun reduce fatigue during extended use.
Image 3: A hand demonstrating the grip on the TOOLCY pressure washer gun, highlighting its ergonomic handle with TPR rubber grip and ceramic trigger for comfortable and low-vibration operation. - Adjust Spray (with Nozzle):
Adjust the spray pattern by changing nozzles (if applicable) or adjusting the nozzle on your pressure washer gun to suit the cleaning task.
- Vorgang abschließen:
When finished, release the trigger, turn off the pressure washer unit, and then turn off the water supply. Squeeze the trigger again to relieve any remaining pressure in the system before disconnecting.
Wartung
- Schlauchinspektion: Regularly inspect the pressure washer hose for cuts, abrasions, bulges, or leaks. Replace the hose immediately if any damage is found. The TOOLCY hose is designed to be kink-resistant and durable, but proper care extends its lifespan.
- Gun Inspection: Check the pressure washer gun for any cracks, leaks, or damage to the trigger mechanism. Ensure the swivel inlet rotates smoothly.
- Verbindungsprüfung: Periodically check all quick connections and threaded fittings for tightness and wear. Replace O-rings or seals if leaks occur.
- Reinigung: After each use, flush the hose and gun with clean water to remove any detergent or debris. Wipe down the exterior surfaces.
- Lagerung: Store the hose and gun in a cool, dry place, away from direct sunlight and freezing temperatures. Coil the hose neatly to prevent kinks.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| No water flow or low pressure from gun |
|
|
| Lecks an den Verbindungen |
|
|
| Hose kinking during use |
|
|
Technische Daten
- Schlauchlänge: 30 Fuß
- Hose Inner Diameter: 1/4 Zoll
- Hose Max Pressure: 3400 PSI
- Hose Max Temperature: 140°F / 60°C
- Gun Max Pressure: 5000 PSI
- Gun Max Flow Rate: 10.5 GPM
- Gun Inlet: M22-14mm (standard) with 360° swivel
- Gun Outlet: 1/4-Zoll-Schnellanschluss
- Kompatibilität: Universal replacement for most gas power washers up to 7hp/220cc and electric pressure washers. Compatible with brands like Ryobi, Dewalt, Greenworks, Karcher, Craftsman, Honda, Troy Bilt, Generac, Flexzilla, Simpson. Note: Not compatible with Sun Joe, AR Blue Clean, or other pressure washers with M22-15mm hoses without an additional adapter (M22-14mm Female to M22-15mm Male, sold separately).
Garantie und Support
For warranty information or technical support, please contact TOOLCY customer service through the retailer where the product was purchased or visit the official TOOLCY website. Please have your product model number (B0FJRZVPJX) and purchase date available when contacting support.
You can visit the TOOLCY Store for more information: TOOLCY Official Store
