1. Produktüberschreitungview
The COMET 2523-L1 / FG2523L10000 is a retractable step stool caster specifically designed for use with Rubbermaid Stepstools models 2523, 2523-31, 2523-38, and 2524-1. This caster features a unique retractable mechanism: when weight is applied to the step stool, the caster retracts, allowing the stool to rest firmly on its outer rim for stability. When the weight is removed, the caster extends, enabling easy movement of the stool. Each caster is designed to contribute to a maximum weight capacity of 350 lbs for a complete set, aligning with GSA standards for the compatible stepstools.
Image: A single black retractable step stool caster, showing the wheel, the main body, the spring, and the top pin for insertion. This component is crucial for the mobility and stability of compatible step stools.
Packungsinhalt:
- 1 x Retractable Step Stool Caster
- 1 x Retraction Spring (pre-assembled or separate, as per design)
2. Installationsanleitung
Vor der Installation:
- Ensure the step stool is clean and free from debris in the caster mounting holes.
- Verify that the caster model (2523-L1 / FG2523L10000) is compatible with your Rubbermaid Stepstool (2523, 2523-31, 2523-38, 2524-1).
- Bei Bedarf können geeignete Schutzhandschuhe getragen werden.
Installationsschritte:
- Prepare the Step Stool: Invert the step stool to expose the caster mounting holes on the underside.
- Align the Caster: Take one caster and align its top pin with an empty mounting hole on the step stool. Ensure the spring is correctly positioned around the pin.
- Insert the Caster: Firmly push the caster's pin into the mounting hole until it is fully seated. You may hear a click as it locks into place.
- Repeat for All Casters: Install the remaining casters into their respective mounting holes following the same procedure.
- Testinstallation: Once all casters are installed, turn the step stool upright. Apply light pressure to the top of the stool to ensure the casters retract properly. When pressure is removed, the casters should extend.
3. Funktionsprinzipien
The COMET retractable step stool caster operates on a simple yet effective mechanism. When the step stool is not in use or is being moved, the casters are extended, allowing the stool to roll freely across surfaces. This facilitates easy repositioning of the stool without lifting.
Upon applying weight to the step stool (e.g., when a user steps onto it), the internal spring mechanism of the caster compresses. This causes the caster wheel to retract upwards, lifting the wheel off the ground. The step stool then settles firmly onto its stable outer rim, providing a secure and non-moving platform for the user. When the weight is removed, the spring decompresses, and the caster extends back down, allowing the stool to be moved again.
4. Pflege und Wartung
To ensure the longevity and optimal performance of your COMET retractable step stool casters, follow these simple maintenance guidelines:
- Regelmäßige Reinigung: Periodically inspect the caster wheels and axles for accumulated dirt, dust, hair, or debris. Clean with a damp cloth. Avoid harsh chemicals that may damage the plastic material.
- Schmierung: Lightly lubricate the axle of the wheel and the spring mechanism with a silicone-based spray lubricant if you notice any stiffness or squeaking. Do not over-lubricate.
- Inspektion: Regularly check the casters for any signs of wear, cracks, or damage to the wheel, housing, or spring. Ensure the caster is securely seated in the step stool's mounting hole.
- Lagerung: Store the step stool in a clean, dry environment when not in use to prevent premature wear or corrosion.
5. Fehlerbehebung
If you encounter issues with your COMET retractable step stool casters, refer to the table below for common problems and their solutions.
| Problem | Mögliche Ursache/Lösung |
|---|---|
| Caster does not retract when weight is applied. |
|
| Caster does not extend when weight is removed. |
|
| Step stool is difficult to move. |
|
| Caster falls out of the step stool. |
|
6. Technische Daten
| Besonderheit | Detail |
|---|---|
| Modellnummern | 2523-L1, FG2523L10000 |
| Marke | KOMET |
| Kompatibilität | Rubbermaid Stepstools 2523, 2523-31, 2523-38, 2524-1 |
| Raddurchmesser | Approximately 1-1/2 inches |
| Radbreite | Approximately 5/8 inches |
| Gesamtlänge | Approximately 4-3/8 inches |
| Material | Plastik |
| Farbe | Schwarz |
| Item Weight (per caster) | 2 Unzen |
| Einheitenanzahl | 1.0 Count (per package) |
| Maximale Gewichtskapazität | 350 lbs (for a complete set of casters on a compatible stepstool) |
7. Garantie und Support
Specific warranty details for the COMET 2523-L1 / FG2523L10000 retractable step stool caster are not provided in this manual. For information regarding warranty coverage, returns, or technical support, please contact the manufacturer, COMET, directly through their official website or customer service channels. Please have your product model number (2523-L1 or FG2523L10000) and purchase information ready when contacting support.
