1. Produktüberschreitungview
The Vortex Spitfire 3x Prism Scope is engineered for rapid target acquisition in close- to medium-range shooting scenarios. Its sophisticated prism-based design facilitates a compact optical system without compromising optical quality. The EBR-556B reticle is etched directly onto the prism, ensuring consistent point-of-aim. It features selectable red/green illumination with five intensity levels to adapt to various lighting conditions.
Key features include fully multi-coated lenses for bright views, a fast focus eyepiece, and a robust construction that is shockproof, fogproof, and waterproof.
Image 1.1: The Vortex Spitfire 3x Prism Scope, showcasing dank seiner kompakten Bauweise und Objektivlinse.
Image 1.2: Rear-left view of the Spitfire 3x Prism Scope, highlighting the ocular lens and control knobs.
2. Einrichtung
Proper setup ensures optimal performance and user comfort. Follow these steps for mounting and initial adjustments.
2.1 Komponentenidentifikation
Image 2.1: Diagram identifying key components: Ocular Lens, Reticle Focus, Flip Cap Lens Cover, Battery Compartment, Elevation Adjustment, Windage Adjustment, Objective Lens, and Picatinny Rail.
2.2 Montage des Zielfernrohrs
The Spitfire 3x Prism Scope features a multi-height mount system, allowing for 30mm and 40mm mounting heights to suit various platforms and user preferences. Securely attach the scope to a Picatinny rail using the integrated mounting system. Ensure all mounting screws are tightened to the manufacturer's recommended torque specifications to prevent movement under recoil.
2.3 Einlegen der Batterie
The reticle illumination is powered by a single battery, located in the battery compartment (refer to Image 2.1). Unscrew the battery cap, insert the battery with the correct polarity, and securely replace the cap. The battery life is approximately 250 hours on the highest setting and up to 3,000 hours on the lowest setting.
3. Bedienungsanleitung
3.1 Absehenbeleuchtung
The Spitfire 3x Prism Scope features an EBR-556B reticle with selectable red/green illumination and five intensity levels. Use the illumination control knob (typically located on the top or side of the scope) to turn the illumination on/off and adjust brightness. Select the appropriate color and intensity based on ambient light conditions for optimal visibility.
Image 3.1: The EBR-556B reticle pattern, etched directly onto the prism for consistent point-of-aim.
3.2 Reticle Focus
To achieve a sharp reticle image, adjust the fast focus eyepiece. Look through the scope at a plain, light-colored background (like a wall or clear sky) and quickly turn the reticle focus ring until the reticle appears crisp and clear. Avoid staring at the reticle for too long during this process, as your eye may compensate for blurriness.
3.3 Wind- und Höhenkorrektur
The scope features external adjustment turrets for windage and elevation (refer to Image 2.1). These turrets allow you to zero the scope to your firearm. Each click of the adjustment turret moves the point of impact by a specific amount at a given distance. Consult your firearm's manual or ballistic data for precise zeroing procedures.
4. Wartung
Regular maintenance ensures the longevity and performance of your Spitfire 3x Prism Scope.
4.1 Reinigung
- Linsen: Use a soft brush or compressed air to remove loose dust and debris. For smudges or fingerprints, use a clean microfiber cloth and a lens cleaning solution. Avoid using harsh chemicals or abrasive materials.
- Exterieur: Wischen Sie die Außenflächen mit einem weichen, damp Tuch.
4.2 Speicherung
Store the scope in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure lens caps are in place to protect the lenses from dust and scratches. For long-term storage, consider removing the battery to prevent potential leakage.
4.3 Waterproof and Fogproof Performance
The Spitfire 3x Prism Scope is nitrogen purged and O-ring sealed, providing waterproof and fogproof performance. These features prevent internal fogging and protect against moisture ingress, ensuring clear views in various environmental conditions.
5. Fehlerbehebung
This section addresses common issues you might encounter with your Spitfire 3x Prism Scope.
- Blurry Reticle: Adjust the fast focus eyepiece (Section 3.2). If the reticle remains blurry, ensure your eye relief is consistent.
- Keine Absehenbeleuchtung: Überprüfen Sie die Batterie. Stellen Sie sicher, dass sie korrekt eingesetzt ist und ausreichend geladen ist. Tauschen Sie sie gegebenenfalls aus.
- Uneinheitlicher Aufprallpunkt: Verify that the scope is securely mounted to the firearm. Check mounting screws for proper torque. Ensure the firearm itself is functioning correctly.
- Beschlagen: While the scope is fogproof, external fogging can occur in extreme temperature changes. Wipe external lenses with a clean cloth. If internal fogging occurs, contact customer support.
6. Spezifikationen
| Marke | Wirbel |
| Modellname | Spitfire 3X Prism Scope |
| Teilenummer | SPR-1303 |
| Farbe | Schwarz |
| Stil | Prism Scope |
| Vergrößerung Minimum | 3x |
| Vergrößerung maximal | 1 (Note: This likely refers to the objective lens diameter or a misinterpretation, as the product is 3x magnification) |
| Objektivlinsendurchmesser | 1 (Note: This likely refers to the objective lens diameter or a misinterpretation, as the product is 3x magnification) |
| Absehentyp | EBR-556B |
| Material | Aluminium |
| Artikelgewicht | 0.46 Kilogramm |
| Montagetyp | Multi-Height |
| Kompatible Geräte | Not compatible with VMX-3T Magnifier |
| UPC | 875874005372 |
7. Garantieinformationen
The Vortex Spitfire 3x Prism Scope is backed by an unconditional, unlimited lifetime warranty. For detailed information regarding warranty claims or service, please refer to the official Vortex webWebsite oder wenden Sie sich an den Kundendienst.
8. Kundendienst
For further assistance, technical questions, or to explore other Vortex products, please visit the official Vortex store or contact their customer service department.
