FNIRSI FPM-02 Umweltmonitor – Benutzerhandbuch

1. Einleitung

The FNIRSI FPM-02 is a high-precision 3-in-1 environmental monitor designed for measuring illuminance (lux), temperature, and humidity. It features a 2-inch color display for clear data visualization and is suitable for various professional applications including office lighting assessment, horticulture, laboratories, and photography studios.

2. Lieferumfang

• FNIRSI FPM-02 Environmental Monitor
• USB-Kabel
• Tragetasche
• Bedienungsanleitung

3. Hauptmerkmale

• 3-in-1-Messung: Monitors Lux, temperature, and humidity simultaneously.
• 2-Zoll-Farbbildschirm: High-definition display with light and dark theme modes for optimal readability.
• Real-time Data & Curve Recording: Visualizes environmental changes over time.
• Adjustable Alarm Thresholds: Alerts users when measurements exceed set values.
• Schnell Sampling-Rate: 20Hz (50ms) for real-time monitoring.
• Zweisprachige Benutzeroberfläche: Unterstützt Englisch und Chinesisch.
• Built-in Sleep Mode & Data Logging: Enhances battery efficiency and usage tracking.

Figure 1: FNIRSI FPM-02 Environmental Monitor with key features highlighted on its color screen.

4. Einrichtung

4.1 Aufladen des Geräts

1. Connect the provided USB cable to the FNIRSI FPM-02's charging port.
2. Stecken Sie das andere Ende des USB-Kabels in ein Standard-USB-Netzteil (nicht im Lieferumfang enthalten) oder in einen USB-Anschluss Ihres Computers.
3. The device will indicate charging status on its screen. A full charge typically takes approximately 2-3 hours.

4.2 Ein-/Ausschalten

• To power on: Press and hold the Power button (usually located on the side or front panel) until the screen illuminates.
• Zum Ausschalten: Halten Sie die Ein-/Aus-Taste gedrückt, bis sich das Gerät ausschaltet.

5. Bedienungsanleitung

5.1 Navigation auf der Benutzeroberfläche

The FPM-02 features a user-friendly interface with a 2-inch HD color screen. Use the navigation buttons (up, down, left, right, OK/Enter) to move through menus and select options. The device supports both English and Chinese languages, which can be selected in the settings menu.

5.2 Taking Measurements (Illuminance, Temperature, Humidity)

Upon powering on, the device typically defaults to the main measurement screen, displaying real-time values for illuminance (Lux/FC), temperature (°C/°F), and relative humidity (%).

• Beleuchtungsstärke: Ensure the light sensor (located at the top of the device) is unobstructed and pointed towards the light source or area to be measured. The device will display the light intensity in LUX or FC.
• Temperatur Feuchtigkeit: The internal sensors continuously monitor ambient temperature and humidity. Allow a few minutes for readings to stabilize after significant environmental changes.

5.3 Real-time Data and Curve Recording

The device can display real-time data and record changes over time, presenting them as a curve. Access this feature through the main menu to visualize trends and fluctuations in environmental conditions.

5.4 Festlegen von Alarmschwellenwerten

You can set custom alarm thresholds for Lux, temperature, and humidity. If a measured value exceeds or falls below the set threshold, the device will trigger an alert. Refer to the device's settings menu to configure these thresholds.

5.5 Sleep Mode and Data Logging

To conserve battery, the device features a configurable sleep mode. It also includes data logging capabilities, allowing you to store measurement data for later review and analysis. Consult the user manual for detailed instructions on activating and managing these functions.

6. Wartung

• Reinigung: Use a soft, dry cloth to clean the device. Do not use abrasive cleaners or solvents. Ensure the light sensor and display are kept clean for accurate readings.
• Lagerung: Bewahren Sie das Gerät an einem kühlen, trockenen Ort, geschützt vor direkter Sonneneinstrahlung und extremen Temperaturen, auf. Bei längerer Lagerung sollte der Akku teilweise (ca. 50 %) geladen sein, um seine Lebensdauer zu verlängern.
• Batteriepflege: Avoid fully discharging the lithium battery frequently. Recharge the device when the battery level is low.

7. Fehlerbehebung

8. Technische Daten

9. Garantie und Support

This FNIRSI FPM-02 Environmental Monitor comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions.

For technical support, troubleshooting assistance, or warranty claims, please contact the retailer or manufacturer directly. Keep your purchase receipt as proof of purchase.