Einführung
Thank you for choosing the CRAFTSMAN 50-Piece LED Multi-Bit Screwdriver Set. This comprehensive repair kit is designed for precision tasks, offering a wide array of bits for various applications. The integrated LED light enhances visibility in dimly lit work areas, and the ergonomic design ensures comfortable and efficient use.
Image: The CRAFTSMAN 50-Piece LED Multi-Bit Screwdriver Set, displayed open to reveal the red screwdriver handle and the organized arrangement of 50 precision bits within its black and red storage case.
Packungsinhalt
- 1 x CRAFTSMAN LED Multi-Bit Screwdriver Handle
- 50 x Precision Screwdriver Bits (various types including Flat, Phillips, Hex, Torx, etc.)
- 1 x 1/4-inch to 4mm Drive Adapter
- 1 x Magnetic Bit Extender
- 1 x Aufbewahrungskoffer
Image: An annotated diagram illustrating key features of the screwdriver set, including the secure bit hold mechanism, the firm grip provided by the knurled metal handle, the bright LED for illuminating the work area, and the comprehensive nature of the 50-piece repair kit.
Einrichtung und Bit-Installation
- Öffnen Sie den Koffer: Unlatch the storage case to access the screwdriver handle and bits.
- Wählen Sie das richtige Bit aus: Identify the appropriate precision bit for your task from the organized bit tray.
- Setzen Sie das Bit ein: Gently push the selected bit into the screwdriver handle's bit-locking collet until it is securely seated. The slim profile bit-locking collet ensures a firm hold.
- Using the Extender (Optional): For recessed screws or extended reach, insert the magnetic bit extender into the screwdriver handle first, then insert the desired bit into the extender.
- Verwendung des Adapters (optional): If a 1/4-inch bit is required, use the 1/4-inch to 4mm drive adapter. Insert the 4mm end into the screwdriver handle, then insert the 1/4-inch bit into the adapter.
Bild: Eine detaillierte view of the screwdriver handle's bit-locking collet, demonstrating how it securely holds a precision bit in place for stable operation.
Bedienungsanleitung
- Greifen Sie den Griff: Kn haltenurled metal handle firmly for optimal control.
- Aktivieren Sie das LED-Licht: Press the button on the screwdriver handle to turn on the integrated LED light. This illuminates the work area, improving visibility for precision tasks. Press again to turn off.
- Druck ausüben und drehen: Position the bit onto the fastener. Apply steady, downward pressure and rotate the screwdriver handle clockwise to tighten or counter-clockwise to loosen.
- Swivel Cap: The swivel cap at the end of the handle allows for continuous pressure application while rotating the handle with your fingers, ideal for delicate tasks.
Image: A close-up shot demonstrating the screwdriver's integrated LED light actively illuminating a dark work surface, highlighting its utility in low-light conditions.
Bild: Eine detaillierte view of the CRAFTSMAN screwdriver's knurled metal handle, showcasing its textured design engineered to provide a firm and secure grip during use.
Wartung
- Reinigung: Wipe the screwdriver handle and bits with a clean, dry cloth after each use to remove dirt, oil, or debris. Do not use abrasive cleaners or solvents.
- Lagerung: Always store the screwdriver handle and all bits securely in the provided storage case when not in use. This protects the bits from damage and prevents loss.
- Bit-Inspektion: Periodically inspect bits for wear or damage. Replace worn or damaged bits to ensure optimal performance and prevent damage to fasteners.
- LED Battery: The LED light is powered by internal batteries. As per specifications, these are not user-replaceable. If the LED light ceases to function, the unit may require replacement.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Bit slips from fastener head | Incorrect bit size/type; Worn bit; Insufficient pressure | Ensure correct bit is used; Replace worn bits; Apply firm, steady pressure |
| Bit not securely held in handle | Bit not fully inserted; Collet mechanism dirty or damaged | Push bit firmly until seated; Clean collet; If damaged, contact support |
| LED-Licht geht nicht an | Depleted internal battery; Faulty LED mechanism | Internal batteries are not user-replaceable. If the LED fails, the unit may need replacement. |
Technische Daten
| Besonderheit | Detail |
|---|---|
| Modellnummer | CMHT68011N |
| Marke | HANDWERKER |
| Im Lieferumfang enthaltene Komponenten | 50pc LED Multi-Bit Screwdriver Set (Screwdriver handle, 50 precision bits, 1/4-in to 4mm drive adapter, magnetic bit extender, storage case) |
| Kopfstile | Multiple (e.g., Flat, Phillips, Hex, Torx, Apple-specific bits, etc.) |
| Stromquellentyp | Hand-powered (for driving); Internal battery (for LED light) |
| Batterien erforderlich | No user-replaceable batteries required for operation. LED light uses internal, non-replaceable batteries. |
| Produktabmessungen (L x B x H) | 10.49 x 5 x 26.01 cm (4.13 x 1.97 x 10.24 Zoll) |
| Artikelgewicht | 226.8 g (0.5 Pfund) |
| Empfohlene Verwendung | Electronics Repair, Construction, Home Improvement, Furniture Assembly |
| UPC | 198706058507 |
Garantieinformationen
CRAFTSMAN products are manufactured to high-quality standards. For specific warranty details regarding your 50-Piece LED Multi-Bit Screwdriver Set, please refer to the warranty card included with your purchase or visit the official CRAFTSMAN webBewahren Sie Ihren Kaufbeleg für eventuelle Garantieansprüche auf.
Kundenservice
Should you have any questions, require assistance, or need to report an issue with your CRAFTSMAN 50-Piece LED Multi-Bit Screwdriver Set, please contact CRAFTSMAN customer support. Contact information can typically be found on the product packaging or the official CRAFTSMAN webWebsite.
- WebWebsite: Www.craftsman.com (Examp(der tatsächliche Link kann abweichen)
- Telefon: Siehe Produktverpackung oder webWebsite für regionale Kontaktnummern.
