Einführung
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your ATK Blazing Sky F1 V2 Wireless Gaming Mouse. Please read this guide thoroughly to ensure optimal performance and longevity of your device.
Image: The ATK Blazing Sky F1 V2 Wireless Gaming Mouse, showcasing dank seines ergonomischen Designs.
Aufstellen
1. Auspacken und erste Aufladung
Carefully remove the mouse and all accessories from the packaging. Before first use, it is recommended to fully charge the mouse.
- Connect the provided USB-C cable to the mouse's charging port and the other end to a USB power source (e.g., computer USB port, USB wall adapter).
- The charging indicator light will show the charging status. Refer to the LED indicator section for details.
- For F1 V2 Extreme models, fast charging requires a USB 3.0 port and the original USB data cable.
Image: Illustration of the high-density battery inside the ATK F1 V2 mouse, highlighting its capacity and fast charging capabilities.
2. Verbindungsmodi
The ATK Blazing Sky F1 V2 supports three connectivity modes: 2.4G Wireless, Bluetooth, and Wired.
2.1. 2.4 G Wireless-Verbindung
- Locate the 8K Nano or GEM dongle included with your mouse.
- Stecken Sie den Dongle in einen freien USB-Anschluss Ihres Computers.
- Schalten Sie die Maus mit dem Netzschalter an der Unterseite ein.
- The mouse should automatically connect to the dongle. If not, press the pairing button (if available) or refer to the software for pairing instructions.
Image: The ATK F1 V2 mouse alongside its new GEM 8K dongle, illustrating the wireless connection component.
2.2. Bluetooth Connection (V2 Ultra Max)
- Stellen Sie sicher, dass Bluetooth auf Ihrem Computer aktiviert ist.
- Schalten Sie die Maus mithilfe des Schalters an der Unterseite in den Bluetooth-Modus.
- Press and hold the Bluetooth pairing button (if applicable) until the indicator light flashes, indicating pairing mode.
- On your computer, search for Bluetooth devices and select "ATK F1 V2" to connect.
2.3. Kabelgebundene Verbindung
- Connect the provided USB-C cable to the mouse's front port.
- Verbinden Sie das andere Ende des USB-C-Kabels mit einem USB-Anschluss an Ihrem Computer.
- Die Maus schaltet automatisch in den kabelgebundenen Modus und beginnt mit dem Ladevorgang.
3. Software Installation (ATK HUB)
For advanced customization, including DPI settings, button remapping, macro creation, and polling rate adjustments, download the ATK HUB software from the official ATK webFolgen Sie den Anweisungen auf dem Bildschirm zur Installation.
Bedienungsanleitung
1. Ein-/Ausschalten
Use the switch on the bottom of the mouse to turn it ON or OFF. Turning the mouse off when not in use conserves battery life.
2. DPI-Anpassung
The mouse features a dedicated DPI button (usually located on the top or bottom) to cycle through preset DPI levels. You can customize these levels using the ATK HUB software.
- PAW3395Ultra Sensor: 100-30,000 DPI.
- PAW3950Ultra Sensor: 10-30,000 DPI (adjustable in 10-step precision, overlockable up to 42,000 DPI).
Bild: Nahaufnahme view of the PAW3950 Ultra Flagship Sensor, illustrating its advanced tracking capabilities.
3. Abfragerate
The ATK F1 V2 supports Wired/Wireless Dual 8000 Hz polling rate for instant tracking. This can be configured via the ATK HUB software.
4. Programmierbare Tasten
The mouse features multiple programmable buttons. Use the ATK HUB software to assign custom functions, macros, or shortcuts to these buttons for enhanced control.
Image: Diagram showing the ATK Self-Developed 54 Series ApexShark MAX Mouse Solution with the Nordic 54 Series MCU, highlighting its high-speed processing.
Wartung
1. Reinigung
The ATK F1 V2 features an All-New Nano Coating, making it sweat-resistant, stain-resistant, and easy to clean.
- Verwenden Sie ein weiches, trockenes, fusselfreies Tuch, um die Oberfläche der Maus abzuwischen.
- Bei hartnäckigen Verschmutzungen leicht dampReinigen Sie das Tuch mit Wasser oder einem milden, nicht scheuernden Reinigungsmittel.
- Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the coating and internal components.
- Regularly clean the optical sensor area on the bottom of the mouse with a cotton swab to ensure accurate tracking.
Image: Visual representation of the All-New Nano Coating on the ATK F1 V2 mouse, emphasizing its sweat-resistant and easy-to-clean properties.
2. Batteriepflege
- Um die Lebensdauer des Akkus zu maximieren, vermeiden Sie es, den Akku häufig vollständig zu entladen.
- Laden Sie die Maus mit dem mitgelieferten USB-C-Kabel auf.
- Bewahren Sie die Maus an einem kühlen, trockenen Ort auf, wenn Sie sie längere Zeit nicht verwenden.
Fehlerbehebung
1. Maus reagiert nicht
- Batterie prüfen: Ensure the mouse is charged. Connect it via USB-C cable to check if it powers on.
- Konnektivität prüfen:
- 2.4-GHz-Funk: Ensure the dongle is securely plugged into a working USB port and the mouse is in 2.4G mode. Try a different USB port.
- Bluetooth: Verify Bluetooth is enabled on your computer and the mouse is correctly paired and in Bluetooth mode. Try re-pairing.
- Verdrahtet: Stellen Sie sicher, dass das USB-C-Kabel sowohl mit der Maus als auch mit dem Computer fest verbunden ist.
- Aus- und Wiedereinschalten: Turn the mouse off, wait a few seconds, then turn it back on.
- Starte den Computer neu: Sometimes a computer restart can resolve connectivity issues.
2. Inconsistent Tracking or Cursor Lag
- Sensor reinigen: Dust or debris on the optical sensor can cause tracking issues. Clean the sensor area on the bottom of the mouse.
- Oberfläche: Ensure you are using the mouse on a suitable surface. Highly reflective or uneven surfaces can affect tracking. A quality mouse pad is recommended.
- Interferenz: In wireless modes, other wireless devices might cause interference. Try moving the dongle closer to the mouse or using a USB extender.
- Abfragerate: Ensure the polling rate is set appropriately for your system. Very high polling rates (e.g., 8K Hz) might require sufficient CPU resources.
- Software: Check the ATK HUB software for any sensor calibration options or firmware updates.
3. Schaltflächen reagieren nicht
- Softwarekonflikt: Stellen Sie sicher, dass keine andere Software die Belegung der Maustasten beeinträchtigt.
- Einstellungen zurücksetzen: Use the ATK HUB software to reset button assignments to default.
- Körperliche Untersuchung: Inspect buttons for any physical obstruction or damage.
Technische Daten
The ATK Blazing Sky F1 V2 series offers several models with varying specifications:
| Besonderheit | F1 V2 Ultra Max | F1 V2 Ultimate | F1 V2 Extreme |
|---|---|---|---|
| Maße | 118.2 × 62.4 × 38.8 mm (Optimized for Small to Medium Hands) | ||
| Gewicht | 54 ± 2g | 39 ± 2g | 38 ± 2g |
| Sensor | PAW3395Ultra | PAW3950Ultra | PAW3950Ultra |
| MCU | Nordic 54L15 | Nordic 54L15 | Nordic 54H20 |
| Lösung | ATK Self-Developed Nordic 54 Series ApexShark MAX Mouse Solution | ||
| Schalter | ATK Lightblade Mechanical Switches | ATK Custom Optical Switches | Omron Optical Switches |
| Scrollrad | TTC-Gold | ||
| Mausfüße | Standard White Double-Layer Anti-Dent Mouse Feet + Bonus Set | ||
| Dongle | All-New 8K Nano Dongle | All-New GEM 8K Dongle | All-New GEM 8K Dongle |
| Konnektivität | 2.4 GHz / Bluetooth / Kabelgebunden | 2.4G / Wired | 2.4G / Wired |
| Abfragerate | Kabelgebunden/Kabellos Dual 8K | ||
| Button Latency | 0.18 ms | 0.18 ms | 0.16 ms |
| Batteriekapazität | 800 mAh | 300 mAh | 200mAh (Supports Fast Charging) |
| Akkulaufzeit | 600+ Stunden | 250+ Stunden | 80+ Stunden |
| Beschichtung | All-New Nano Coating | ||
Image: Detailed product specifications table comparing the F1 V2 Ultra Max, Ultimate, and Extreme models.
Garantie und Support
ATK products are designed for durability and performance. For warranty information, please refer to the warranty card included in your product packaging or visit the official ATK webWebsite.
Kundenservice
If you encounter any issues or have questions not covered in this manual, please contact ATK customer support through their official webSie können auch die Website oder die in Ihrer Produktdokumentation angegebenen Kontaktinformationen besuchen. ATK Store auf Amazon für zusätzliche Ressourcen.
