ThermoPro TP210B Kabelloses Gefrierschrank-Kühlschrank-Thermometer – Benutzerhandbuch

1. Einleitung

The ThermoPro TP210B is a wireless thermometer system designed to monitor temperatures in refrigerators and freezers. It provides real-time temperature readings from up to two remote sensors to a central receiver unit. This system features a 500 ft (150 m) wireless range, high accuracy, and customizable temperature alerts to help maintain optimal storage conditions for food and other temperature-sensitive items.

Zu den Hauptmerkmalen gehören:

• Erweiterte Funkreichweite: Up to 500 ft (150 m) using updated RF technology for stable connection.
• Pre-Paired for Immediate Use: No complex setup required; units are ready to operate upon powering on.
• Großer Messbereich: Accurate readings from -40°F to 158°F (-40°C to 70°C).
• Smart Temperature Alerts: Customizable high/low temperature alarms on the receiver.
• LCD-Display mit Hintergrundbeleuchtung: Clear display of current, maximum, and minimum temperatures, visible day or night.
• Rechargeable Transmitter: Transmitter uses a rechargeable lithium battery, suitable for low-temperature environments.
• Flexible Platzierung: Multiple mounting options for both receiver and transmitters.

2. Packungsinhalt

• 1 x Empfängereinheit
• 2 x Transmitter Units
• 2 x AAA Batteries (for Receiver)
• 1 x USB Charging Cable (for Transmitters)
• 1 x Benutzerhandbuch

3. Produktdiagramm

Familiarize yourself with the components of your ThermoPro TP210B system:

Image: The main receiver unit with its large display and control buttons (MODE, UP, DOWN, HISTORY/CLEAR, LIGHT °F/°C), alongside two smaller transmitter units.

Empfängereinheit:

• LCD Anzeige: Shows temperatures for both channels, Max/Min records, and battery status.
• MODE-Taste: Cycles through settings and alarm modes.
• AUF/AB-Tasten: Adjust values in settings or alarm modes.
• HISTORY/CLEAR Button: Views and clears Max/Min temperature records.
• LIGHT °F/°C Button: Activates backlight and switches temperature units.
• Batteriefach: Located on the back, for 2x AAA batteries.

Transmitter Units:

• Temperatursensor: Misst die Umgebungstemperatur.
• LED-Anzeige: Flashes to indicate data transmission.
• Netzschalter: Schaltet den Sender ein/aus.
• Ladeanschluss: USB-C port for recharging the internal lithium battery.

4. Einrichtung

The ThermoPro TP210B units are pre-paired at the factory. Follow these steps for initial setup:

1. Batterien im Empfänger einlegen: Open the battery compartment on the back of the receiver unit. Insert 2 AAA batteries, ensuring correct polarity (+/-). Close the compartment.
2. Ladungssender: Connect the provided USB charging cable to the charging port on each transmitter unit and to a standard USB power source (e.g., phone charger, computer USB port). The LED indicator will show charging status. Charge fully before first use.
3. Sender einschalten: Press and hold the power button on each transmitter unit until the LED indicator flashes.
4. Verbindung überprüfen: The receiver unit should automatically display temperature readings from both transmitters. If not, refer to the Troubleshooting section for re-pairing instructions.

Bild: Eine Nahaufnahme view illustrating the battery installation for the receiver unit and the USB charging process for a transmitter unit.

5. Bedienungsanleitung

5.1 Anzeige überview

Das LCD-Display des Empfängers zeigt folgende Informationen an:

Image: The receiver's digital display, highlighting the current temperature readings for two channels, along with their respective maximum and minimum recorded temperatures and low battery indicators.

• Channel 1 Temperature: Typically for the refrigerator.
• Channel 2 Temperature: Typically for the freezer.
• Max/Min-Datensätze: Highest and lowest temperatures recorded since the last reset.
• Anzeige für niedrigen Batteriestand: Appears when receiver or transmitter batteries are low.
• Signalstärkeanzeige: Shows connection status to transmitters.

5.2 Auswahl der Temperatureinheit (°F/°C)

To switch between Fahrenheit (°F) and Celsius (°C), press the LIGHT °F/°C Taste am Empfängergerät.

5.3 Einstellen von Temperaturwarnungen

The system allows you to set custom high and low temperature limits for each channel. An audible and visual alarm will activate if the temperature exceeds these limits.

Image: The receiver unit showing an active alarm, with a visual representation of a refrigerator door left open and a transmitter inside, illustrating a scenario where a temperature alert would be triggered.

1. Drücken Sie die MODUS button once to enter the alarm setting mode for Channel 1 (refrigerator). The high limit will flash.
2. Verwenden Sie die UP or RUNTER buttons to adjust the desired high temperature limit.
3. Drücken MODUS again to set the low limit for Channel 1. Adjust with UP or RUNTER.
4. Drücken MODUS a third time to enter the alarm setting mode for Channel 2 (freezer). Repeat steps 2 and 3 for Channel 2.
5. Drücken MODUS again to exit alarm setting mode. The alarm icon will appear next to the channel if an alarm is active.

5.4 Viewing and Clearing Max/Min Records

The receiver automatically records the maximum and minimum temperatures for each channel since the last reset.

• Drücken Sie die VERLAUF/LÖSCHEN Taste einmal zu view the maximum recorded temperatures for both channels.
• Drücken VERLAUF/LÖSCHEN wieder zu view the minimum recorded temperatures for both channels.
• To clear the Max/Min records, press and hold the VERLAUF/LÖSCHEN 3 Sekunden lang drücken, während viewing the records. The display will reset to current temperatures.

5.5 Platzierungsrichtlinien

Optimal placement ensures accurate readings and reliable wireless communication.

Image: A visual guide demonstrating the versatility of the ThermoPro TP210B, showing the receiver magnetically attached to a fridge, standing on a table, and hanging from a hook, while transmitters are shown standing on a shelf and clipped to a rack inside a fridge.

• Empfängerplatzierung: The receiver can be placed on a countertop using its integrated stand, mounted magnetically to a metal surface (e.g., refrigerator exterior), or hung on a wall using the hanging hole. Position it within 500 ft (150 m) of the transmitters, minimizing obstructions.
• Senderplatzierung: Place transmitters inside the refrigerator and freezer compartments. They can stand on a shelf or clip onto a rack. Ensure they are not directly exposed to cold air vents or heating elements, which could affect accuracy.

Image: A diagram showing the wireless signal path from transmitters inside a refrigerator and freezer to a receiver unit located in another room, emphasizing the 500-foot range.

6. Wartung

• Reinigung: Wischen Sie die Geräte mit dem Desinfektionsmittel ab.amp Tuch. Nicht in Wasser tauchen oder Scheuermittel verwenden.
• Batteriewechsel (Empfänger): When the low battery indicator appears for the receiver, replace the 2 AAA batteries.
• Laden des Senders: When the low battery indicator appears for a transmitter, recharge it using the provided USB cable. A full charge ensures reliable operation, especially in low-temperature environments.
• Lagerung: If storing the device for an extended period, remove the AAA batteries from the receiver and ensure transmitters are fully charged before storage. Store in a dry, cool place.

7. Fehlerbehebung

• No Temperature Readings / Lost Connection:
  • Ensure both the receiver and transmitters are powered on.
  • Check battery levels for both units. Recharge or replace as needed.
  • Move the receiver closer to the transmitters. Walls, metal appliances, and electronic devices can interfere with the wireless signal.
  • Erneut koppeln: If connection is lost, try re-pairing. Power off all units. Power on the receiver. Then, power on each transmitter one by one. They should automatically reconnect.
• Ungenaue Messwerte:
  • Ensure transmitters are not placed directly in front of cold air vents or near heat sources.
  • Allow units to stabilize for 30 minutes after placement to get accurate readings.
  • Compare readings with another known accurate thermometer if possible.
• Alarm ertönt nicht:
  • Verify that the high/low temperature limits are set correctly for each channel.
  • Ensure the alarm function is enabled (check for the alarm icon on the display).

8. Spezifikationen

9. Garantieinformationen

ThermoPro products are manufactured with high-quality materials and craftsmanship. This product is covered by a limited warranty against defects in materials and workmanship from the date of purchase. Please refer to the official ThermoPro webDie genauen Garantiebedingungen finden Sie auf unserer Website oder wenden Sie sich an unseren Kundendienst.

10. Unterstützung

For any questions, assistance, or troubleshooting not covered in this manual, please contact ThermoPro Customer Service:

• WebWebsite: Visit the official ThermoPro webWebsite mit FAQs, Produktregistrierung und Kontaktinformationen.
• E-Mail: Refer to your product packaging or the ThermoPro webWebsite für die E-Mail-Adresse des Kundensupports.
• Telefon: Contact the customer support hotline if available in your region.

Please have your model number (TP210B) and purchase date ready when contacting support.