1. Einleitung
Thank you for choosing the Lepro LED Mini Flashlights. This manual provides essential information for the safe and effective use of your new flashlight. Please read these instructions carefully before operating the device and retain them for future reference.
The Lepro LED Mini Flashlight is a compact, durable, and portable lighting tool designed for various applications, including outdoor activities, emergencies, and everyday tasks. It features multiple lighting modes and a robust aluminum construction.
2. Wichtige Sicherheitshinweise
- Batteriesicherheit: Use only AA alkaline batteries. Do not mix old and new batteries, or different types of batteries. Ensure correct polarity (+/-) when inserting batteries. Remove batteries if the flashlight will not be used for an extended period to prevent leakage.
- Augenschutz: Do not shine the flashlight directly into eyes, as the high lumen output can cause temporary vision impairment.
- Kinder: Außerhalb der Reichweite von Kindern aufbewahren. Dieses Produkt ist kein Spielzeug.
- Hitze: The flashlight head may become warm during prolonged use on High mode. This is normal.
- Demontage: Versuchen Sie nicht, die Taschenlampe zu zerlegen oder zu verändern, da dies zum Erlöschen der Garantie führen und ein Sicherheitsrisiko darstellen kann.
3. Packungsinhalt
- Lepro LED Mini Flashlight (x2)
- AA-Alkalibatterien (x4)
4. Einrichtung
4.1 Einlegen der Batterie
The Lepro LED Mini Flashlight requires two (2) AA alkaline batteries. Please follow these steps to install them:
- Die Endkappe der Taschenlampe lässt sich durch Drehen gegen den Uhrzeigersinn abschrauben.
- Insert two AA batteries into the battery compartment, ensuring the positive (+) end faces towards the flashlight head and the negative (-) end faces towards the tail cap.
- Schrauben Sie die Endkappe im Uhrzeigersinn wieder fest, bis sie sicher sitzt.
Image: Correct battery installation for the Lepro LED Mini Flashlight. Ensure batteries are inserted with the correct polarity.
5. Bedienungsanleitung
5.1 Ein-/Ausschalten und Modusauswahl
The flashlight features a single button on the tail cap for operation.
- Ein-/Ausschalten: Press the tail cap button fully until it clicks.
- So ändern Sie die Modi: With the flashlight on, gently half-press the tail cap button (without clicking) to cycle through the available lighting modes: High, Low, and Strobe.
Image: Demonstrates the flashlight's three lighting modes (High, Low, Strobe) and how to cycle through them using the single button. A full press turns the light on/off, and a half press switches modes.
6. Hauptmerkmale
6.1 Illumination Performance
The flashlight provides a 96-meter beam distance with a 6000-7000K cool white light, offering clear visibility for close to mid-range tasks.
Image: This image illustrates the flashlight's powerful beam, reaching up to 96 meters (315 feet), providing clear visibility in low-light conditions.
6.2 Akkulaufzeit
The flashlight offers extended battery life with two efficient modes:
- High Mode (300 lumens): Bis zu 3 Stunden Dauerbetrieb.
- Low Mode (150 lumens): Bis zu 7 Stunden Dauerbetrieb.
Image: This image highlights the flashlight's long-lasting battery performance, offering up to 3 hours of illumination on High mode (300 lumens) and over 7 hours on Low mode (150 lumens).
6.3 Haltbarkeit und Wasserbeständigkeit
The flashlight features a durable, corrosion-resistant aluminum body with an IPX4 water resistance rating, protecting it from water splashes from any direction. It is designed to withstand accidental drops and impacts.
Image: This image shows the flashlight's IPX4 water resistance, indicating it can withstand splashes from any direction, making it suitable for use in various weather conditions. It also emphasizes its durable aluminum body.
6.4 Tragbarkeit
Designed for maximum portability, the flashlight measures 25mm in diameter and 147mm in length, weighing approximately 105g (without batteries). A sturdy, removable clip is included for easy attachment to pockets, belts, or backpacks.
Image: This image illustrates the compact size (25mm x 147mm) and lightweight design (105g without battery) of the flashlight, along with its removable clip for easy attachment to pockets, belts, or backpacks.
7. Wartung
- Reinigung: Wischen Sie das Gehäuse der Taschenlampe mit einem weichen,amp Tuch. Keine Scheuer- oder Lösungsmittel verwenden.
- Batteriepflege: Replace batteries when the light becomes dim. Always dispose of used batteries responsibly according to local regulations. If storing the flashlight for an extended period, remove the batteries to prevent corrosion.
- O-Ringe: Periodically inspect the O-rings for wear and tear. A thin layer of silicone grease can help maintain their waterproof seal.
8. Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Die Taschenlampe lässt sich nicht einschalten. | Dead batteries, incorrect battery orientation, loose tail cap. | Replace batteries, check polarity, tighten tail cap. |
| Das Licht ist schwach oder flackert. | Low battery power, loose connection. | Replace batteries, ensure tail cap is fully tightened. |
| Die Beleuchtungsmodi können nicht geändert werden. | Button not half-pressed correctly. | Ensure a gentle half-press of the tail cap button to cycle modes. |
9. Spezifikationen
| Besonderheit | Detail |
|---|---|
| Modellnummer | 120032 |
| Lichtquelle | LED |
| Material | Aluminium |
| Farbe | Reines Schwarz |
| Abmessungen (L x T) | 147 mm x 25 mm (5.79" x 0.99") |
| Gewicht (ohne Batterien) | 105 g (ca. 3.7 oz) |
| Stromquelle | 2 x AA-Alkalibatterien (im Lieferumfang enthalten) |
| Beleuchtungsmodi | High (300 lumens), Low (150 lumens), Strobe |
| Strahldistanz | Bis zu 96 Meter |
| Farbtemperatur | 6000-7000K (Cool White) |
| Wasserbeständigkeit | IPX4 (wasserbeständig) |
| Besondere Merkmale | Durable, High Lumens, Impact Resistant, Lightweight, Portable |
10. Garantie und Kundendienst
Lepro products are designed and manufactured to high-quality standards. This product is covered by a limited warranty against defects in materials and workmanship from the date of purchase. Please refer to the warranty information provided with your purchase or visit the official Lepro webWebsite für alle Details.
For technical support, troubleshooting assistance, or warranty claims, please contact Lepro customer service through the retailer where the product was purchased or visit the Lepro official support channels.
