Jianou Push Button Switch Instructions

Jianou Push Button Switch Instructions

Produktinformationen

Product Name: [SWITCH]

Model: [button switch]

Batch Number：1003936480293

MANUFACTURER & EU REPRESENTATIVE INFO

• Manufacturer: [Jianou Xinruitong E-commerce Co., Ltd，Room 201, No. 107, Village Road, Qili Street, Jianou City, Fujian Province，JIANG XIN， 17859306031/15635441682qq.com]
• EU Authorized Representative: [eVatmaster Consulting GmbH， Raiffeisenstraße 2 B11,63110 Rodgau, Germany， 49-61062699873/contact@evatmaster.com]

Sicherheit und Warnungen

• ⚠ WARNING: CHOKING HAZARD – Small parts. Not for Children under 3 years.

Gebrauchsanweisung

1. Basisinformation
   Type: switch
   Operating Temp: -25°C ~ +85°C
2. Installation
   Mount firmly to avoid loosening.
   Align actuator (button/lever) with triggering part; no excessive pressure.
   Keep away from humidity, high temp, and corrosive substances.
3. Verdrahtung
   Cut power before wiring.
   Match wire to rated current; connect NO/NC/COM correctly.
   Do not pull terminals forcibly.
4. Hinweise zur Verwendung
   Überschreiten Sie nicht die Nennlautstärketage/aktuell.
   Avoid frequent rapid switching.
   Keep contacts clean; no volatile liquid cleaning.
   Waterproof type required for humid/outdoor use.
5. Fehlerbehebung
   No response: Check power, wiring, actuator alignment.
   Intermittent conduction: Tighten terminals or clean contacts.
   Failure to reset: Clear jamming or replace switch.

COMPLIANCE-INFOS

。This template is provided by AliExpress for reference only. Sellers should adjust the content based on actual product features and local laws. AliExpress assumes no responsibility for any compliance or legal issues arising from the use of this template.