App überview
The app provides plant management, real-time home monitoring, configurable intelligent energy management modes, and maintenance and account features. Documentation is current as of September 2025 (for reference only).
Technische Daten
- Document currency: current as of September 2025 (for reference only).
- New plant creation process time: approximately ~2 Minuten.
- Intelligent Dynamic mode availability: available in select countries.
Quick Setup / Use
- Open the app and go to Anlagenmanagement.
- Klopfen New Plant and create your plant profile.
- Scan/enter the device serial number (SN) according to your device label to verify ownership.
- Fill in the plant’s Basic Profile and complete the setup.
- To monitor, return to Heim and tap a plant card to view Überwachungsdaten.
- For detailed system monitoring, open the Energiefluss diagram and tap component cards (Solar, Load, Grid, Battery) for detailed real-time data.
- So aktivieren Sie Intelligent Dynamics, swipe to the Intelligent Dynamics card on Home, tap the toggle, and complete all required electricity price information fields; the system activates the mode on successful configuration.
Fehlerbehebung
- Plant deletion requires extra steps: Nach dem Tippen Löschen, additional verification is required.
- Ownership/device access issues: If the device SN is already owned by others, you can apply to join the plant as a member or appeal for ownership.
- Intelligent Dynamics not staying active: Wann Intelligent Dynamics is disabled, the system automatically reverts to default Self-Consumption mode.
- Device operational problems: Verwenden Maintenance → Alarm Zu view device operational issues and related state changes with timestamps.
- Reported issues: Verwenden Maintenance → Ticket to track reported issues through ticket state updates and resolution progress.
- Bluetooth-Konfiguration: Verwenden Maintenance → Config as the app’s Bluetooth tool for near-field device configuration and setup.
Häufig gestellte Fragen
- How do I add a new plant in the app?
- In Plant Management, tap New Plant, scan/enter the device SN from the device label to verify ownership, fill in the plant’s basic profile, then complete the setup (takes ~2 minutes).
- What should I do if the device SN is already owned by someone else?
- You can apply to join the plant as a member or appeal for your ownership.
- Wie kann ich view real-time monitoring data?
- On the Plant Management page, tap a plant card to view monitoring data. When reopening the app, it returns to real-time data display on the Home page. In the Energy Flow diagram, tap component cards (Solar, Load, Grid, Battery) for detailed real-time data.
- How is Intelligent Dynamic mode enabled, and what happens if it’s disabled?
- On the Home page, locate the Intelligent Dynamics card, toggle it on, and complete all required electricity price information fields. The system activates Intelligent Dynamic mode upon successful configuration. If disabled, the system automatically reverts to Self-Consumption mode.
- How do I delete a plant, and is verification required?
- In the plant actions page, tap Delete to remove the plant. Additional verification is required for plant deletion.
- What tools are available under Maintenance?
- Under Maintenance you can access: Message (System/Ticket/Interactive/Plant messages), Alarm (operational issues, state changes, timestamps), Ticket (issue tracking and resolution progress), and Config (Bluetooth tool for near-field configuration).
Dokumente / Ressourcen
 | Consumer Facing App |
Verweise
- de.pylontech.com.cnwww.en.pylontech.com.cn
- Bedienungsanleitungmanual.tools
Published: August 12, 2026